21mm (0.82in) Black on White 3:1 Heat Shrink Tube

Ideally suited to mark cables, fiber cables, and wires, this 21mm (0.82in) black print on white shrink wrap label tubing is recommended for diameters ranging from 4.2mm to 13.5mm (0.16in to 0.53in). With a 3:1 shrink ratio, this tubing can shrink to a third of its size when heat is applied, enabling it to pass over connectors and still shrink down to a snug fit on the cable. Meets UL 224 standard and can withstand up to 600 volts and 257° F (125° C).

1.5m (4.9ft) of tube per cassette. 1 cassette per package. For use with P-touch 500 Series, 800 Series and 900 Series label printers.

Please note that the old HSe tapes (eg. HSe-251) which had a shrink ratio of 2:1, have been replaced by these new HSe tapes (eg. HSe-251E) which have a more useful 3:1 shrink ratio.  Please see the table below when choosing the correct size from the new HSe tapes.  Heat Shrink tubing is now also available in white or yellow.

Important: Download the latest firmware and drivers and latest version of P-touch Editor to ensure printer functionality when printing with this new HSe tape.

HSe tube is a printable heat shrink tubing designed to mark cables, fiber and wires.

The HSe251e can be used in the following Brother Label Makers:

PTE500, PTE510VP, PTE550W, PTE560BT, PTE800W, PTD800W, PTP900W, PTP950NW