Brother HSE611e: Black on Yellow Printable 3:1 Heat Shrink Tubing for Marking Cables, Fiber and Wires. 0.20 in x 4.9 ft (5.2mm x 1.5m) Black on White. Recomended Outside Diameter: 0.8-3.1mm (0.03-0.12in)

Please note that the old HSe tapes (eg. HSe-611) which had a shrink ratio of 2:1, have been replaced by these new HSe tapes (eg. HSe-611E) which have a more useful 3:1 shrink ratio.  Please see the table below when choosing the correct size from the new HSe tapes.  Heat Shrink tubing is now also available in white or yellow.

Jobs that include labeling cables, fiber and wires will be able to be completed successfully when Brother HSE611e Printable 3:1 heat shrink tubing is used. This tubing produces black lettering on a white background and the tape measures .20” x 4.9’ (5.2mm x 1.5m). HSE611e cassettes are rugged and are designed primarily for industrial uses. In fact, these tape cassettes can only be used select label makers. Professional label makers such as the PTE300 have a rugged design and loading the cassettes into these devices is a very quick and easy process. The printing on these labels is via thermal transfer so no inks are needed, saving you time and money. The label-making process is also very easy. After installing the tapes cassette, use the keyboard to type the words for your label and select the “print” button on the label maker. When the label prints, cut the excess ends off and push the tubing through the label. Then use a heat gun to shrink-fit the label into place.

Important: Download the latest firmware and drivers and latest version of P-touch Editor to ensure printer functionality when printing with this new HSe tape.

HSe tube is a printable heat shrink tubing designed to mark cables, fiber and wires.

The HSe611e can be used in the following Brother Label Makers:

PTE300, PTE310BTVP, PTE500, PTE510VP, PTE550W, PTE560BT, PTE800W, PTD800W, PTP900W, PTP950NW